Last Modified: 11-29-2007 1.6 C
Service Category: Audio/Visual/Telematics Section: Navigation/Multi Info Display
Model Year: 2008 Model: Sequoia Doc ID: RM00000182R02UX
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: DESCRIPTION (2008 Sequoia)

DTC

58-10

Gyro Error

DTC

80-10

Gyro Error

DESCRIPTION

DTC Code

DTC Detection Condition

Trouble Area

58-10

Ground short, power supply short, or open circuit in gyro signal.
  • Gyro sensor
  • Navigation receiver assembly

80-10

INSPECTION PROCEDURE

HINT:

After the inspection is completed, clear the DTCs NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: DTC CHECK / CLEAR (2008 Sequoia) .

PROCEDURE

1.

CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

(a) Enter the "Navigation Check" mode (Vehicle Sensors) NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: NAVIGATION CHECK MODE (2008 Sequoia) .

(b) Check the gyro voltage.

Standard voltage:

0.5 to 4.5 V

OK

2.

CLEAR DTC

(a) Clear the DTCs NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: DTC CHECK / CLEAR (2008 Sequoia) .

NEXT

3.

RECHECK DTC

(a) Recheck for DTCs and check if the same trouble occurs again.

HINT:

If DTCs are detected frequently, replace the navigation receiver.

OK:

Malfunction disappears.

OK